Overview
The Outback Fire Pit is an elegant center piece to any patio or backyard. With many GFRC top finish options and powder coated metal base colors to go with it, the Outback with Cattle Ranch Design is a truly customizable fire pit. This fire table is controlled by a Match Lit Igntion System. See below for details on that flame control!
GFRC Concrete Top Finish:
GFRC is a glass fiber reinforced concrete material providing a pleasing aesthetic and structural integrity thats lasts a lifetime. The Outdoor Plus provides options for this material during the manufacturing process. Another benefit of GFRC over traditional concrete material is that it offers more flexibility and a higher impact strength tolerance while maintaining the integrity previously mentioned. In addition to these traits, It is highly resistant to any weather or temperature fluctuations making it perfect for outdoor and fire pit use. GFRC, along with other material offered by The Outdoor Plus can be ordered with some of the color options seen below.
Powder Coated Base Finish:
Powder-Coating is a sleek and durable material and finish process option that pairs perfectly with outdoor fire pits and tables. Powder-coated materials go through a type of surface finishing technique that involves applying a dry powder to a substrate, typically metal, and then curing it with heat. That makes the material resistant to many factors and allow it hold up over time. It is resistant to chipping or cracking - ensuring that your product stays looking just like the day it was installed and set up.
Features:
- Glass fiber reinforced concrete top with powder coated metal base
- Choice of fire pit finish color
- Fire media available (20lbs of fire glass reccommended)
- Black Lava Rock Included
- Natural Gas or Propane
- Match Lit Ignition, Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), or Plug and Play (CSA Certified)
- Dimensions - (D) 60”
- 70,000 BTUs
- 31" burning area
Ignition Systems
- Match Lit - The match Lit ignition system is the most simple way to control your flame and allows for the easiest install of any of the ignitions. To operate, hold a lighter over the burner and slowly open the gas valve!
- Match Lit with Flame Sense - The match lit with flame sense ignition system operates the same as the regular match lit but with the added protection of Flame Sense. Flame-sensing kits continuously monitor the flame in your fire pit using an automatic sensor, providing an extra layer of protection against dangerous gas leaks.
- Spark Igntion with Flame Sense - The spark ignition allows you to start your flame with the push of a button. Push-button ignitions are operated with a battery-powered ignitor probe placed in the pan base close to the burner and a button module mounted on the fire pit. When you push the button, the probe sends a spark to the burner for ignition. This ignition system is also equipt with Flame Sense technology for an extra layer of protection.
- Low Voltage Electronic Ignition - This electronic ignition system runs on a lower voltage and requires a power line run to the fire pit from a 30VDC transformer or power supply (please make sure it is compatible with your application). Switches, dials, and other control accessories can be used for control. Electronic ignition is perfect for resturants, hotels, and other commercial areas as it is the safest option. Flame sensing technology is standard with all electronic ignition systems for added safety.
- Plug & Play Electronic Ignition - The plug and play electronic ignition allows you to plug the ignition module into an outlet (110v GFCI is required, please see installation instructions) and is controlled with a dial timer or light switch. Flame sensing technology is standard with all electronic ignition systems for added safety.
**A certified electrician MUST install all electrical components or the warranty will be voided**
Product Resources
The Outback Fire Pit is an elegant center piece to any patio or backyard. With many GFRC top finish options and powder coated metal base colors to go with it, the Outback with Cattle Ranch Design is a truly customizable fire pit. This fire table is controlled by a Match Lit Igntion System. See below for details on that flame control!
GFRC Concrete Top Finish:
GFRC is a glass fiber reinforced concrete material providing a pleasing aesthetic and structural integrity thats lasts a lifetime. The Outdoor Plus provides options for this material during the manufacturing process. Another benefit of GFRC over traditional concrete material is that it offers more flexibility and a higher impact strength tolerance while maintaining the integrity previously mentioned. In addition to these traits, It is highly resistant to any weather or temperature fluctuations making it perfect for outdoor and fire pit use. GFRC, along with other material offered by The Outdoor Plus can be ordered with some of the color options seen below.
Powder Coated Base Finish:
Powder-Coating is a sleek and durable material and finish process option that pairs perfectly with outdoor fire pits and tables. Powder-coated materials go through a type of surface finishing technique that involves applying a dry powder to a substrate, typically metal, and then curing it with heat. That makes the material resistant to many factors and allow it hold up over time. It is resistant to chipping or cracking - ensuring that your product stays looking just like the day it was installed and set up.
Features:
- Glass fiber reinforced concrete top with powder coated metal base
- Choice of fire pit finish color
- Fire media available (20lbs of fire glass reccommended)
- Black Lava Rock Included
- Natural Gas or Propane
- Match Lit Ignition, Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), or Plug and Play (CSA Certified)
- Dimensions - (D) 60”
- 70,000 BTUs
- 31" burning area
Ignition Systems
- Match Lit - The match Lit ignition system is the most simple way to control your flame and allows for the easiest install of any of the ignitions. To operate, hold a lighter over the burner and slowly open the gas valve!
- Match Lit with Flame Sense - The match lit with flame sense ignition system operates the same as the regular match lit but with the added protection of Flame Sense. Flame-sensing kits continuously monitor the flame in your fire pit using an automatic sensor, providing an extra layer of protection against dangerous gas leaks.
- Spark Igntion with Flame Sense - The spark ignition allows you to start your flame with the push of a button. Push-button ignitions are operated with a battery-powered ignitor probe placed in the pan base close to the burner and a button module mounted on the fire pit. When you push the button, the probe sends a spark to the burner for ignition. This ignition system is also equipt with Flame Sense technology for an extra layer of protection.
- Low Voltage Electronic Ignition - This electronic ignition system runs on a lower voltage and requires a power line run to the fire pit from a 30VDC transformer or power supply (please make sure it is compatible with your application). Switches, dials, and other control accessories can be used for control. Electronic ignition is perfect for resturants, hotels, and other commercial areas as it is the safest option. Flame sensing technology is standard with all electronic ignition systems for added safety.
- Plug & Play Electronic Ignition - The plug and play electronic ignition allows you to plug the ignition module into an outlet (110v GFCI is required, please see installation instructions) and is controlled with a dial timer or light switch. Flame sensing technology is standard with all electronic ignition systems for added safety.
**A certified electrician MUST install all electrical components or the warranty will be voided**
Education
The Outback Fire Pit is an elegant center piece to any patio or backyard. With many GFRC top finish options and powder coated metal base colors to go with it, the Outback with Cattle Ranch Design is a truly customizable fire pit. This fire table is controlled by a Match Lit Igntion System. See below for details on that flame control!
GFRC Concrete Top Finish:
GFRC is a glass fiber reinforced concrete material providing a pleasing aesthetic and structural integrity thats lasts a lifetime. The Outdoor Plus provides options for this material during the manufacturing process. Another benefit of GFRC over traditional concrete material is that it offers more flexibility and a higher impact strength tolerance while maintaining the integrity previously mentioned. In addition to these traits, It is highly resistant to any weather or temperature fluctuations making it perfect for outdoor and fire pit use. GFRC, along with other material offered by The Outdoor Plus can be ordered with some of the color options seen below.
Powder Coated Base Finish:
Powder-Coating is a sleek and durable material and finish process option that pairs perfectly with outdoor fire pits and tables. Powder-coated materials go through a type of surface finishing technique that involves applying a dry powder to a substrate, typically metal, and then curing it with heat. That makes the material resistant to many factors and allow it hold up over time. It is resistant to chipping or cracking - ensuring that your product stays looking just like the day it was installed and set up.
Features:
- Glass fiber reinforced concrete top with powder coated metal base
- Choice of fire pit finish color
- Fire media available (20lbs of fire glass reccommended)
- Black Lava Rock Included
- Natural Gas or Propane
- Match Lit Ignition, Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), or Plug and Play (CSA Certified)
- Dimensions - (D) 60”
- 70,000 BTUs
- 31" burning area
Ignition Systems
- Match Lit - The match Lit ignition system is the most simple way to control your flame and allows for the easiest install of any of the ignitions. To operate, hold a lighter over the burner and slowly open the gas valve!
- Match Lit with Flame Sense - The match lit with flame sense ignition system operates the same as the regular match lit but with the added protection of Flame Sense. Flame-sensing kits continuously monitor the flame in your fire pit using an automatic sensor, providing an extra layer of protection against dangerous gas leaks.
- Spark Igntion with Flame Sense - The spark ignition allows you to start your flame with the push of a button. Push-button ignitions are operated with a battery-powered ignitor probe placed in the pan base close to the burner and a button module mounted on the fire pit. When you push the button, the probe sends a spark to the burner for ignition. This ignition system is also equipt with Flame Sense technology for an extra layer of protection.
- Low Voltage Electronic Ignition - This electronic ignition system runs on a lower voltage and requires a power line run to the fire pit from a 30VDC transformer or power supply (please make sure it is compatible with your application). Switches, dials, and other control accessories can be used for control. Electronic ignition is perfect for resturants, hotels, and other commercial areas as it is the safest option. Flame sensing technology is standard with all electronic ignition systems for added safety.
- Plug & Play Electronic Ignition - The plug and play electronic ignition allows you to plug the ignition module into an outlet (110v GFCI is required, please see installation instructions) and is controlled with a dial timer or light switch. Flame sensing technology is standard with all electronic ignition systems for added safety.
**A certified electrician MUST install all electrical components or the warranty will be voided**